Wireless Dog Fence System Note:
1.Please read the manual carefully before The use of.
2.This product relies on wireless signal, many factors may impact the keep watch over range, such as air humidity, walls, wireless signal and so on.
Step 1: Turn on the transmitter by pressing ON/OFF button for 3 seconds.
Step 2: Power Level Adjustment: press the button “+” or “-” for the adjustment of transmitting power level, which will change the remote keep watch over range of this system. Press button “+” to increase the power level(The max. value is level 100.), press button “-” for level decrease.(The min. value is 0.)
Step 3: Make sure the transmitter is on, then press on/off button shortly to enter cording status. The screen will display “1dp” with flashing.
Step 4: The transmitter must be powered by AC adapter, which the output is 5V/1A.
1. 100 levels of intensity.
2. Latest No wire design, no want to bury the wire into the ground or stack in your yard.
3. The min. range is 20 meters and the max. range is up to 500 meters from transmitter.
4. Pulsed proportional stimulus–closer your dog gets to the boundary,more intense it is going to be.
5. Progressive tone stimulus–a warning tone first and then stimulate if your dog would not stop move to the boundary.
1x Transmitter(The dog not included)
1x Power Cord
1x User Manual
1x Operating Guide
1x Voltage Tester
4x Bark Stopper
2x Rubber Stopper
For any product questions, please contact ProfessionPets:
【Latest & Effective】 — ProfessionPet invisible dog fence will customize a cordless radial shaped boundary with adjustable levels 1-100 up to 500 feet in radius, forming an invisible circular fenceless perimeter to limit your dog.Please install the transmitter 1.6 meters away from the ground,do not put it near the metal wall, so as not to interfere with the signal, affecting the remote keep watch over distance.
【Super Easy For The use of】– The use of Procedure: Turn on the transmitter – Turn on the transmitter to pair. Start the transmitter first and the receiver collar then,press the transmitter ON / OFF button shortly until the transmitter comes into cording status, digital displays “1dp” and flashing,lasting 7 seconds for the code, then press the receiver power button until the receiver comes into cording status too. The receiver red light on, on the issue of “B” sound at the same time as the blue light flash once, said t
【100% Waterproof Wireless Dog Fence Receiver Collar】 — Waterproof and rechargeable collar receiver, which is designed with automatic sleep function.Lithium battery is 300 mA,about 12 hours’ standby time ,8-9 hours The use of time with full charge .Collar size (from 6 inches -26 inches) for 8-110lbs of dog (Small/Medium/Large/Extra Large Dogs),The static mode of the collar is secure and harmless to your pet.Stable signal, fast synchronization. No want to worry about the dog suddenly get shocked.
【Level 1-100 sensitivity & Up To 500 Meters Radius】 — Advanced rechargeable collar so you’ll stop buying new batteries.Do not touch the two screws on the collar before connecting the receiver and the transmitter for not being mistakenly touched by the electric shock.Please use the light to test first before turning on the power.
【Notice】 — 1.Proper fit of the collar is important. Too long or too tight on the pet’s neck may cause skin damage.Avoid leaving the collar on the dog for more than 12 hours per day.It is necessary to take the collar off every 1 to 2 hours for a rest.3.It is important that you support training with your pet frequently.